Electro Voice EVID C8,2D
A special case design with a bass reflex and 8 speakers provide unexpectedly powerful transmission of low frequencies. A one-inch high-frequency driver with a titanium diaphragm provides a flat frequency response in the range up to 18 kHz. Quick installation at four points. The kit includes a complete mounting kit of a carrier ring and runners for installation on ceiling tiles (for normal installation conditions this kit is quite sufficient). Available in three versions: regular (C8.2), with a reduced rear volume for installation in a limited space (C8.2LP), increased with a special horn design for use in rooms with high ceilings.
8" coaxial two-way with extended LF. Waveguide coupled Ti Tweeter.Full bandwidth overload protection.Front baffle wattage tap adjustment.Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation.Includes tile bridge and mounting ring for easy installation. Integrated ported enclosure for extended bass response. UL and CE listed
Freq. Response (-10 dB): 50 Hz – 20 kHz
Coverage (Conical): 110°
Power Handling: 75 W Cont. / 300 W Peak
Sensitivity (SPL 1W/1m): 91 dB
Max Calculated SPL: 110 dB Cont. / 116 dB Peak
Impedance: 8 Ohms nominal (transformer bypass)
Network: Network and transducers protected, 12 dB/oct 2.6 kHz
LF Transducer: 8 in. (200 mm) Polypropylene cone
HF Transducer: 1 in (25 mm) Ti Mylar laminate
Transformer Taps: 70V: 1.88, 3.75, 7.5, 15 or 30w, 100V: 3.75, 7.5, 15 or 30W Bypass: 8 Ohms
Connectors: C8.2: Phoenix type removable, with screw terminals and “loop-thru”, accepts 12 ga wire C8.2D: Fire-safety rated input block, 3 terminal barrier strip accepts 12 ga wire
Enclosure Material: Baffle- UL 94V-O rated ABS Backcan-Zinc plated steel
Grille: Perforated powder coated steel with safety tether
Support Hardware: Tile bridge, backing plate support, cutout template, paint shield
Dimensions: 272 x 255 x 270 mm
Weight: 5 kg
